Commercial dining chair · Model DC-B18-BR
Osoitteessa YeZhi huonekalut, we supply DC-B18-BR for indoor restaurant, café, hotel dining and furniture-distribution projects that need an armless upholstered chair with a slim metal-frame appearance. The approved drawing confirms a 47.1 cm / 18.5 in seat height, a 73.5 cm / 28.9 in overall height and a 49 cm / 19.3 in backrest width. The supplied specification identifies plywood, upholstery and metal as the main material classes, with a 14 × 2 mm round-tube frame specification and a molded-foam bolster back of approximately 60 mm / 2.36 in diameter.
This model is a strong direction when your project wants a visually light chair, an upholstered seat and a distinctive cylindrical backrest. It is not the right choice when you need verified stackability, outdoor exposure, armrests or a published load/test result before model-level documentation is reviewed.
Use these supplied views to review the chair profile, armless layout, seat form and rear-frame direction before requesting a sample.
The cylindrical upholstered backrest gives DC-B18-BR a recognizable profile without using a tall or visually heavy back. Two slim vertical supports connect the backrest to the frame, while the armless layout keeps the sides open around a dining table.
The molded-foam backrest is intended to provide a padded contact surface. Final sitting feel still depends on the approved foam, upholstery cover, seat build-up and production sample, so we recommend reviewing a sample when comfort and upholstery hand-feel are important to your market.
The rounded upholstered seat softens the chair’s appearance and makes it suitable for interiors that need more comfort than a non-upholstered metal chair. The exact upholstery type, cleaning code, foam density and color standard must be confirmed for each order.
These supplied close-ups help your team review the visible upholstery form and frame connection direction. They do not replace an approved material sample, finish code or engineering drawing.
The 47.1 cm / 18.5 in seat height sits within the common starting range for standard dining-height layouts. For tables around 72–76 cm / 28.3–29.9 in high, it provides a practical starting point, but tabletop height alone is not enough to approve the fit.
Before quotation, send:
The supplied dimension drawing confirms overall height, seat height and backrest width. The supplied text also contains an older W56.5 × D51.5 × H70 cm size statement that conflicts with the current drawing. We therefore do not publish overall width or depth until the final model drawing is approved.
| Kohde | DC-B18-BR Specification |
|---|---|
| Product name | DC-B18-BR Brown Upholstered Bolster Back Dining Chair |
| Malli | DC-B18-BR |
| Luokka | Ruokailutuoli |
| Kokonaiskorkeus | 73.5 cm / 28.9 in |
| Istuimen korkeus | 47.1 cm / 18.5 in |
| Backrest width | 49 cm / 19.3 in |
| Overall width and depth | Confirm on the final approved drawing before quotation |
| Armrests | Ei |
| Main material classes | Plywood, upholstery and metal |
| Metal frame section | 14 × 2 mm round tube |
| Selkänoja | Upholstered molded-foam bolster, approximately 60 mm / 2.36 in diameter |
| Seat | Upholstered seat; final cover, foam and plywood build-up to be confirmed |
| Shown color direction | Ruskea verhoilu |
| Shown frame appearance | Bright metal appearance; exact plating or finish process to be confirmed |
| Intended use | Indoor restaurant, café, hotel dining and commercial dining projects |
| Pinottavuus | Not verified; do not order for stacking requirements without confirmation |
| Assembly status | To be confirmed in the final packing specification |
| Standard MOQ | 20 pieces per model |
| Deep customization MOQ | Normally 100 pieces per design or configuration |
| Sample lead time | About 25 days after material, drawing and finish confirmation |
| Standard production | About 30 days after deposit and final approvals |
| Complex customization | About 35–45 days after deposit and final approvals |
| Maksu | T/T 30% deposit, 70% balance before shipment |
| Trade term | FOB |
| Standard packing | Export carton with EPE foam and corner protection |
| Takuu | 12 months from shipment for verified manufacturing defects under normal commercial use, subject to the approved warranty terms |
We recommend this brown bolster back dining chair for:
The supplied indoor images show the visual scale and styling direction around a round table. Final chair quantities and spacing should be checked against your approved floor plan and table dimensions.
For your project, YeZhi huonekalut can review:
Color and finish should be locked with a physical sample or an approved production code. A screen image is not a production color standard. Dimensional or structural changes require engineering review and may affect MOQ, sample route, lead time and packing volume.
The standard MOQ is 20 pieces per model. Deep customization normally starts from 100 pieces per design or configuration.
A standard or customized sample can be prepared after the material, drawing and finish direction are confirmed. The sample should state exactly what it approves: dimensions, upholstery, color, frame finish, sitting feel, packing or another defined item.
Before shipment, YeZhi huonekalut can route checks for:
These checks are process statements, not a published load, durability or certification result. Relevant EN, BIFMA, SGS or ISO-related documentation can be reviewed according to the selected model, destination market and project requirement. Confirm the exact report scope before ordering.
The standard export pack uses a protective carton, EPE foam and corner protection. Surface separators, leg protection, reinforced cartons, pallets or crates can be reviewed when the product or delivery route requires them.
Exact pieces per carton, carton dimensions, net weight, gross weight, CBM and container-loading quantity are not yet verified for DC-B18-BR. They will be confirmed after the final packing arrangement is approved and measured.
Production lead time is not the same as arrival time. International transport, customs clearance and destination delivery depend on the route, booking and local handling conditions.
Use a cleaner suitable for the selected upholstery and test it on a hidden area first. Avoid soaking the foam or internal seat structure. Wipe the metal frame with a soft cloth and avoid abrasive pads or aggressive chemicals until the exact surface finish and cleaner compatibility are confirmed.
Check floor glides, frame connections and visible upholstery attachment during routine venue maintenance. Replace worn glides before they mark flooring or change the chair’s floor contact.
Send:
It is within the common starting range for dining-height seating. Send the tabletop height, underside clearance, apron depth and table-leg spacing so we can review the full chair-to-table relationship.
The confirmed material class is upholstery, but the exact cover type, supplier code, cleaning method, abrasion data and foam density are not yet locked. Select and approve the final upholstery before quotation or sample production.
Yes. Upholstery and frame-finish options can be reviewed against your quantity, target market and sample requirement. Final color should be approved from a physical reference or production sample.
The standard MOQ is 20 pieces per model. Deep customization normally starts from 100 pieces per design or configuration. Standard production is about 30 days after deposit and final approvals; complex customization normally requires about 35–45 days.
The standard direction is an export carton with EPE foam and corner protection. Exact pieces per carton, carton size, weight, CBM and loading quantity will be confirmed after the final packing specification is measured.
No model-linked load, durability, stability, fire or certification result has been supplied for publication. Send the destination market and required standard so the correct evidence or testing route can be reviewed.
Send your quantity, destination, table details, upholstery reference, frame-finish direction and packing requirements. YeZhi huonekalut will review the suitable configuration and prepare a quotation based on the approved specification.
Lataa uusin luettelo