The DC-A17 is an antique brass upholstered dining chair with arms for restaurant, cafe, hotel, apartment and furniture-program dining interiors. Its 60.7 cm overall width provides an arm-supported seating position, while the 46 cm seat height is planned for dining-height layouts.
YeZhi Furniture can review the upholstery, frame finish, packing and project requirements as one approved configuration. Send your quantity, destination market, table or apron dimensions, finish reference and upholstery requirement so we can check fit before quotation.
Use these exact-product views to review the chair profile, arm position, frame geometry and rear construction before quotation or sample approval.
| 項目 | DC-A17 product information |
|---|---|
| Product / model | DC-A17 Antique Brass Upholstered Arm Dining Chair / DC-A17 |
| カテゴリー | Dining Chair / Dining Armchair |
| Overall size | W 60.7 × D 57.5 × H 74 cm / W 23.9 × D 22.6 × H 29.1 in |
| シート高 | 46 cm / 18.1 in, based on the supplied dimension drawing |
| Frame | Steel frame with an antique brass finish |
| Seat | Upholstered panel; cover, color, padding and attachment details are approved per order |
| Back | Upholstered panel with a plywood component according to the supplied specification |
| Use environment | Indoor dining applications |
| 積み重ね可能 | Not offered as stackable unless separately verified |
| MOQ | 20 pcs per model; trial-order exceptions require approval; deep customization normally from 100 pcs |
| サンプル | About 25 days after material, drawing and finish confirmation |
| Production | About 30 days standard; normally 35–45 days for new materials, colors or structural customization |
| Payment / trade term | T/T 30% deposit, 70% balance before shipment / FOB |
| 梱包 | Protective export carton with EPE foam and corner protection; exact carton data after packing approval |
The supplied drawing records 607 mm overall width, 575 mm overall depth, 740 mm overall height and 460 mm seat height. A 46 cm seat height gives an approximate 26–30 cm difference below a dining table around 72–76 cm high. This is a layout reference rather than a universal fit rule: tabletop thickness, apron depth, base position and the floor plan still need review.
The 60.7 cm product width is not the full planning allowance. Include chair pull-out distance, guest movement, service aisles and the outer points of the angled legs. Because arm height is not recorded in the supplied drawing, send the table or apron drawing when under-table clearance is critical.
The approved product specification identifies a steel frame. “Antique brass” describes the surface appearance; it does not mean the complete frame is solid brass. Approve a physical finish sample because digital images can shift tone, gloss and patina.
The product is confirmed as upholstered, but the supplied information does not lock a leather, leatherette or fabric code. The quotation should identify the exact cover, color, padding direction, seam details, cleaning instruction and batch-approval method.
The supplied description states that the seat and back panels are detachable. The approved drawing and sample should confirm the fixing method, access, service requirement and any replacement-part expectation.
The supplied specification lists a plywood component in the back construction. The final drawing or BOM should confirm grade, thickness, edge treatment and attachment detail. These values are not inferred from photographs.
Finish approval: approve the upholstery, padding reference, antique brass finish, arm/contact parts and seat/back attachment separately. A screen image is a direction reference, not the final production standard.
| Configuration item | Review direction | Required confirmation |
|---|---|---|
| 椅子張り | Color, pattern and approved cover options | Supplier code, material minimum, care and test requirement |
| Frame finish | Antique brass reference or approved project color | Sample, surface process, sheen and batch tolerance |
| サイズ | Product-development review | Revised drawing, sample, stability and packing review |
| Logo and labels | Product label, carton mark, barcode or project identification | Artwork, position, method and quantity |
| 梱包 | Standard export or project-specific protection | Assembly state, contact-point protection, carton and labeling |
| Structure | Controlled development change only | Engineering review, drawing, sample and evidence route |
The standard MOQ is 20 pieces per model. A trial order from 15 pieces may be reviewed only after sales approval. Deep customization normally starts from 100 pieces per design or configuration, and upholstery or finish suppliers may impose separate material minimums.
Standard production is about 30 days after deposit and final specification approval. New materials, colors or structural customization normally require about 35–45 days. Shipping, customs clearance and destination delivery are outside production lead time.
The current package does not contain a model-linked load, durability, stability, fire, corrosion or outdoor report. Relevant EN, ANSI/BIFMA or third-party requirements can be reviewed according to the exact configuration, destination and venue. For European or UK indoor non-domestic seating, BS EN 16139:2025 may be relevant within its scope. For United States public, restaurant or dining seating, ANSI/BIFMA X5.4-2020 (R2025) may be relevant. Naming a standard is not a statement that DC-A17 has passed it.
Follow the instructions for the approved upholstery code. Blot spills promptly, test cleaners on a hidden area and do not assume an unspecified cover tolerates strong chemicals. Clean the metal finish with a soft cloth, keep it dry and avoid abrasive pads. Inspect floor-contact parts, visible fasteners and seat/back attachment points during routine venue maintenance.
Its seat height is 46 cm. With a table around 72–76 cm high, the approximate seat-to-tabletop difference is 26–30 cm. Final fit also depends on tabletop thickness, apron depth, table-base position and arm clearance.
No solid-brass claim is made. The supplied specification identifies a steel frame, while antique brass describes the selected finish appearance.
The chair is confirmed as upholstered, but the supplied package does not identify a final leather, leatherette or fabric code. The quotation and sample must state the exact cover, color, padding direction, cleaning instruction and any project test requirement.
The supplied product description states that the panels are detachable. The approved drawing and sample should confirm the final fixing method, access and service requirement before production.
We specify the current page for indoor use. The available records do not support permanent rain, UV, coastal, poolside or all-weather claims.
The standard MOQ is 20 pieces per model. Trial orders from 15 pieces require sales approval. Deep customization normally starts from 100 pieces per design or configuration. Standard production is about 30 days after deposit and final approvals; customized production normally requires about 35–45 days.
YeZhi Furniture can review the applicable test or documentation route according to the exact product configuration, destination and project requirement. A matching report scope must be confirmed before any pass or certification statement is used.
The standard direction is a protective export carton with EPE foam and corner protection. Exact carton size, unit quantity, weight, CBM and loading quantity are confirmed after the product and packing format are approved.
Send your quantity, destination, table or layout details, upholstery reference, antique brass finish direction, sample requirement and packing needs. We will review the complete configuration before issuing the quotation.
Request a DC-A17 quotationRelated links are placed after the final quotation action so they do not distract from the current product decision.
最新カタログダウンロード