Wholesale 45cm Bar Stools (Factory-Direct, Commercial Supply)

We manufacture and wholesale 45cm seat-height bar stools (≈17.7″) for cafés, restaurants, and hospitality projects that need standard-height seating with reliable batch consistency. Built for daily service, our 45cm stools prioritize stable frames, wipe-clean surfaces, and long-term durability—so you can open new locations, refresh floor seating, or roll out multi-store projects without worrying about height mismatch or wobble issues.

Hot Selling 45cm Bar Stools (Factory Wholesale)

Our 45cm seat-height bar stools (≈17.7″) are built for dining-height seating in cafés, restaurants, and hospitality interiors. For importers, distributors, furniture stores, contractors, and design studios, this section is organized the way you source: by material + function + project use, so you can lock a spec fast, quote fast, and reorder with the same finish later.

Choose your line by frame (steel/aluminum/wood) and by what matters operationally: stackable storage, easy-clean seat surfaces, floor protection, and stable structure for daily movement.

Heavy-Duty 45cm Steel Frame Stool Manufacturer (Reinforced)

Stackable 45cm Metal Café Stool Wholesale (Space-Saving)

45cm PU Easy-Wipe Seat Stool Wholesale (Fast Reset)

45cm Solid Wood Seat Bistro Stool Manufacturer (Warm Look)

45cm Upholstered Seat Stool Manufacturer (Dining Comfort)

45cm Low-Back Stool Factory/Supplier

Wholesale 45cm Outdoor Aluminum Stool (Rust-Resistant)

45cm Powder-Coated Black Stool Manufacturer (Commercial Finish)

45cm Cross-Braced Stability Stool Factory (Anti-Wobble)

45cm Floor-Safe Glide Stool Wholesale(Protects Flooring)

45cm Mix-Color Program Stool Wholesale (For Retail & Chains)

45cm Quick-Ship Standard Spec Stool Wholesale (For Stock Orders)

How to Specify 45cm Bar Stools for Import, Distribution & Projects

1) Lock the correct height (45cm seat height) before anything else
45cm should refer to seat height (≈17.7″), typically used for dining-height seating zones. For project buyers, we confirm seat height + overall height + footprint on a drawing so your team doesn’t approve the wrong spec.

2) Match the use-case: dining zone, café, waiting area, or retail display
Importers and contractors usually source 45cm stools for restaurants, cafés, dessert shops, hotel lounges, and waiting zones—spaces where people sit at standard table height and furniture gets moved daily.

3) Choose materials by maintenance reality, not just appearance
For furniture stores and distributors, the “best seller” is often the easiest to maintain: powder-coated metal frames + PU/vinyl seats for quick wipe-down. Wood seats look premium, but you’ll want a sealed finish that holds up under daily cleaners.

4) Control the biggest after-sales risks: wobble, footrest wear, and finish damage
If you’re importing in volume, these are the real failure points. Prioritize reinforced joints, stable leg geometry, protected footrests, and replaceable floor glides—so you can keep service calls low and protect customer flooring.

5) Think like a project rollout: consistency and reorderability
Design studios and contractors care about long-term consistency. Pick models that can be reordered with the same finish tone and the same seat height, and confirm color codes/material samples before mass production.

6) Operations & storage: stackable and space-saving options matter
For cafés and multi-location buyers, stackable 45cm stools reduce storage pressure and make layout changes faster—especially when you need to clear zones for cleaning or events.

7) Finish & style should support your channel positioning
Furniture stores want clear style families (industrial / modern / wood-warm). Contractors want finishes that survive traffic. Importers want “repeatable finish matching.” Choose base style + color + texture that your channel can sell and your supply chain can repeat.

How to Choose a 45cm Bar Stool Supplier

Verify they’re a real factory: Ask for the factory address, workshop video, and recent packing/loading photos showing your 45cm bar stool cartons and labels.
Lock the “45cm” spec to avoid mistakes: Require a drawing that clearly states seat height 45cm, overall height, and footprint—sign off before paying any deposit.
Protect reorders with written specs: Make them list material and process details in the quote (tube thickness, welding method, coating/finish spec, exact color code).
Judge shipping safety by packing, not promises: Confirm carton grade, inner protection, and anti-scratch separation; for LCL, require palletizing to reduce damage.
Make after-sales crystal clear: Confirm spare parts (glides, screws, footrest parts, seat pads), replacement timeline, and the exact claim process (photos, batch info, quantities).
Compare suppliers fast with one RFQ template: Send the same qty/finish/packing/destination to all suppliers, then compare price breakdown, lead time, MOQ, and terms.

Custom 45cm Bar Stools (OEM/ODM Options)

YeZhi Furniture provides OEM/ODM for 45cm seat-height bar stools (≈17.7″) for café and dining-height commercial seating. For furniture importers, distributors, furniture stores, contractors, and design studios, we don’t just “customize”—we run a controlled program that delivers repeatable specs, consistent finishes, and reorder stability, so your first shipment and your next rollout match without surprises.

Frame Materials & Finishes

Steel, aluminum, or solid wood frames. Powder coat, wood stain, and wear-resistant finishes. Finish is locked by approved samples to avoid batch-to-batch color drift.

Seat & Upholstery

Wood, PU/vinyl, or upholstered seats. We recommend easy-wipe surfaces for cafés and restaurants to reduce stains, odors, and after-sales cleaning complaints.

Dimensions & Ergonomics

Standard 45cm seat height. We confirm seat height, overall height, and footprint on drawings. Adjust seat size, low-back option, and footrest position for layouts.

Operational Features

Add stackable structure, anti-wobble reinforcement, replaceable glides, and strengthened footrests. These features reduce wobble, floor damage, and wear issues in commercial use.

Logo, Labels, Packaging

Carton logos, barcode labels, hangtags, and finish codes for warehouse control. Export packaging prevents rubbing and impacts; pallets available for LCL to reduce damage.

Sampling Process

Requirements → drawings → sample → approval → mass production → QC → packing → shipment. Focus on size tolerance, finish matching, and consistent stability for rollouts.

Commercial-Grade 45cm Bar Stools You Can Rely On

If you’re sourcing 45cm bar stools in volume, the real win isn’t “one good sample”—it’s getting the same feel every reorder. Same seat height, same finish tone, and that solid, no-wobble stability that makes installs predictable for projects and resale.

Stability, Load Support & Joint Reliability

These are built for real commercial use—chairs get dragged, stacked, bumped, and used nonstop. We focus on stable leg geometry, tight joints, and reinforced stress points so the stools stay steady after months of daily movement.

Finish Durability & Scratch Resistance

In restaurants and retail, surfaces take a beating. Our finish options are chosen to hide wear better and resist scratches, so your shipment still looks “new” when it hits the showroom or the job site.

Easy-Clean Surfaces (Less Time, Fewer Complaints)

This is one of the fastest ways to reduce after-sales headaches. Smooth frames and easy-wipe seat options help staff clean quickly, and help stores avoid returns caused by stains and hard-to-maintain materials.

QC for Bulk Orders (So You Don’t Babysit the Shipment)

We don’t rely on spot checks. We inspect materials, monitor production, and verify key specs before packing—so importers and contractors get consistent batches, and distributors can reorder without surprises.

Why Choose YeZhi Furniture for 45cm Bar Stools

If you’re sourcing 45cm seat-height stools for import, retail, or a project rollout, you mainly want two things: no surprises and easy reorders. That’s exactly what we’re built for—stable specs, controlled finishes, and packaging that survives real shipping.

MOQ & Mix-Model Policy

MOQ starts at 15 pcs, and you can mix models, colors, and materials in one order—perfect for distributors testing the market or stores building a display set.

Fast Project Quotes

Tell us your qty + finish + destination port/ZIP. We’ll quote with pricing tiers and a practical shipping plan (LCL vs full container), so you can budget accurately.

Reliable Lead Time

Production is typically around 30 days after confirmation. For contractors and design studios, we keep specs locked so timelines don’t slip from “last-minute changes.”

Export Packaging

We use reinforced cartons and protective inserts, and we can add pallets/crates when needed—especially helpful for LCL shipments and mixed-model orders.

Flexible Shipping Terms

EXW / FOB / CIF supported. Most orders ship by ocean freight, with LCL and full-container options depending on your purchasing strategy.

After-Sales

If a confirmed quality issue happens, we handle it cleanly: 100% replacement or 100% credit on the next batch—so you don’t eat the cost.

Friendly Payment Terms

Standard T/T or L/C. For repeat partners, we can discuss flexible terms that match your ordering cycle and inventory plan.

45cm Bar Stools Gallery

Frequently Asked Questions (FAQ)

If you have any other questions, please feel free to contact us below.

Is 45cm the seat height or the overall height? How do you confirm it?

45cm is the SEAT HEIGHT, measured from the floor to the top of the seat at the center. We confirm it with a signed drawing showing seat height, overall height, and footprint. Then we measure the sample at the same point and lock tolerance at 450mm ±5mm. Final QC repeats that measurement before packing and records it on the inspection sheet.

What table height does a 45cm stool pair with for dining/café layouts?

Use 74–76cm tables with a 45cm seat to keep correct leg clearance. The target gap is 29–31cm (760mm table − 450mm seat). For projects, I always standardize one table height first, then match all stools to it. When you source from a 45cm bar stool factory, request a layout note so your contractor avoids mixing heights across zones.

What materials do you offer for 45cm stools (steel/aluminum/wood), and which sells best for my market?

Best seller for most markets is powder-coated steel: stable, price-friendly, and easy to reorder consistently. Aluminum is the clear choice for outdoor/coastal (rust resistance). Wood frames or wood seats fit premium café/retail looks but need stronger finish control. If you’re starting a new line, pick one “core” steel SKU first, then expand colors and seats later.

Which seat options are easiest to maintain—wood, PU/vinyl, or upholstered—and what do you recommend for commercial use?

For commercial cleaning, PU/vinyl is #1, sealed wood is #2, upholstery is last. PU/vinyl tolerates daily wiping and disinfecting without soaking stains. Sealed wood works if the finish is closed-grain and fully sealed; use non-abrasive cleaners. Upholstery looks great but collects odors and stains fast. In 45cm bar stool wholesale programs, easy-clean seats cut returns and complaints.

How do you prevent wobble over time—what’s your joint structure and stability approach?

Wobble prevention is engineered: stable leg geometry + reinforced joints + strict assembly checks. We focus on leg spread, cross-bracing when needed, and reinforced footrest zones (highest abuse point). Every unit must pass a flat-floor stability test before packing; if floors vary, replaceable glides solve it. The goal is “no wobble out of the carton” and “no loosening after daily dragging.”

Do you support private label—logos, carton marks, barcode labels, and hangtags for retail distribution?

Yes—private label works best when you standardize one coding system across cartons, labels, and SKUs. My go-to setup: carton logo + model code + finish code, plus barcode label with SKU and quantity, and a hangtag with care and selling points. As a 45cm bar stool manufacturer, we keep the same codes for reorders so your warehouse doesn’t mix colors or finishes by mistake.

What quality checks do you run before shipment, and can we do third-party inspection?

We run QC in three stages and we support third-party inspection before shipment. Checks include incoming materials, in-process controls, and pre-pack inspection. Pre-pack focuses on seat height tolerance, wobble/stability, finish defects, sharp edges, carton protection, and count verification. For first orders or new finishes, I always recommend third-party inspection—it’s cheaper than handling claims after the container lands.

For contractors/design studios, can you support project documentation (spec sheets, finish samples, compliance info if needed)?

Yes—projects get a full pack: drawings, spec sheets, finish samples, and material documentation. You’ll receive seat height/overall height/footprint sheets, approval drawings, and finish/seat samples before mass production. If compliance info is needed, you tell us the target standard and we prepare the relevant material details. That’s the level 45cm bar stool wholesalers expect for rollouts and repeat installs.