Marco metálico delgado
The metal frame keeps the profile visually light while coordinating the legs, integrated arms and open back. The final order sheet records the metal specification, rod or tube dimensions and finish system.
TF524 · Indoor Dining Armchair
A project-ready dining armchair with a warm terracotta metal frame, integrated arms, an open fan-shaped back and a slatted seat in a natural wood appearance.
At YeZhi Furniture, we review TF524 together with your table, finish reference, quantity and destination-market requirements before quotation. That avoids approving the visual first and discovering the clearance or specification problem after production.
The photographed terracotta and natural-wood-tone combination is the visual reference shown. Final material and finish details are locked on the approved order specification.
Fast specification scan
Use the verified drawing and visible product structure to decide whether TF524 belongs on the project shortlist.
| Product type | Indoor dining armchair |
|---|---|
| Overall size | 53.8 W × 59 D × 77 H cm / 21.2 × 23.2 × 30.3 in |
| Altura del brazo | 72 cm / 28.3 in |
| Frame profile | Slim metal frame with integrated arms |
| Diseño de la parte trasera | Open fan-shaped metal rod back with curled upper ends |
| Seat appearance | Slatted seat in a natural wood tone; final species and construction follow the approved specification |
| Finish shown | Terracotta frame with natural wood-tone seat |
| Best-fit projects | Restaurant, café, bistro, hotel breakfast and design-led dining |
| Critical check | Table-apron clearance before order approval |
The dimension that decides the order
En 72 cm (28.3 in) arm height is the deciding dimension for many projects. A suitable tabletop height does not guarantee that the chair will tuck in, because the apron, rail or under-table structure may sit too low.
Send these measurements with the RFQ:
The supplied drawing does not show seat height. Seat height is therefore recorded on the approved production drawing, not estimated from a photograph.
Exact product evidence
Front, side, rear and detail views show the exact chair profile, seat layout and open-back structure.
Structure translated into decisions
The metal frame keeps the profile visually light while coordinating the legs, integrated arms and open back. The final order sheet records the metal specification, rod or tube dimensions and finish system.
Radiating metal rods form the characteristic fan back. Curled upper ends create a distinctive edge detail without making the chair visually heavy.
Separate slats and a warm natural tone soften the terracotta frame. Final seat species, construction and surface finish are confirmed against the approved sample or material reference.
Floor-contact caps are visible in the supplied product images. State the floor type when the project needs a defined glide material or spare quantity.
Reject the wrong application early
Control the variables before production
YeZhi Furniture can review frame color, seat tone, surface reference, packaging marks and selected structural or dimensional changes. Color and finish changes follow an approved reference. Structural changes require a revised drawing, while material or finish changes may require a sample.
La cantidad mínima de pedido (MOQ) estándar es 20 unidades por modelo. Deep structural, dimensional or design customization normally starts at 100 pieces per design. A sample is typically prepared in about 25 días after the specification, drawing, finish and commercial terms are approved.
Configuration-specific proof
The QC route follows the approved configuration rather than attaching generic claims to every possible variant.
State the destination market and any required EN, BIFMA or tender-specific test route before production. The applicable document, sample or testing plan is matched to the final configuration; a standard name alone is not proof for every variant.
Commercial planning
| Cantidad mínima de pedido estándar | 20 unidades por modelo |
|---|---|
| Deep customization MOQ | 100 pieces per design |
| Sample timing | About 25 days after approvals |
| Standard production | About 30 days after deposit and final approvals |
| Complex/custom production | About 35–45 days after deposit and final approvals |
| Pago | T/T, 30% deposit and 70% before shipment |
| Trade term | FOB by default |
| Embalaje | Export carton with EPE protection and corner protection; final arrangement follows the approved packing plan |
Production timing excludes sea freight and may change with quantity, finish development, sample approval and packaging requirements.
Protect appearance and floor contact
Quote the correct configuration
Send the inputs that actually change the chair, packing or commercial route.
Buyer questions before order approval
Yes, TF524 is positioned for indoor restaurant, café, bistro, hotel breakfast and design-led dining projects. Final suitability depends on the approved finish, seat specification, table clearance, destination-market requirements and project use conditions.
The drawing shows an arm height of 72 cm (28.3 in). Send the table height, the underside height of the apron or rail, and the required tuck-in depth. We will check the clearance before quotation and drawing approval.
The supplied dimension drawing confirms the overall size and arm height but does not show seat height. Seat height is recorded on the approved production drawing before the order is released.
Yes. Frame color, seat tone, surface reference, packaging marks and selected structural details can be reviewed. Deep structural or dimensional changes follow drawing confirmation and normally use the custom-order MOQ.
The current configuration is offered for indoor use. Outdoor, coastal or continuously damp applications require a separately approved substrate, pretreatment, coating system, hardware and test route.
Stackability is not published for the current TF524 configuration. Projects that require stacking should state the target stack quantity and storage method so we can confirm a suitable configuration or recommend another model.
Send the model, quantity by finish, destination country and port, table and apron dimensions, frame and seat references, required testing or documents, packaging marks and target schedule. These inputs let us quote the correct configuration instead of a misleading base version.
Send your quantity, destination market, table-clearance measurements and finish references. YeZhi Furniture will review the chair configuration, approval route, packing and commercial terms before issuing the quotation.
Request TF524 QuotationDescargue nuestro último catálogo