Front view of the DC-D31 black wire-back metal dining chair

Modelo DC-D31 · Cadeira de jantar

Cadeira de jantar DC-D31 em metal com encosto em arame, na cor preta

At YeZhi Furniture, we supply this black wire-back metal dining chair for importers, distributors and restaurant, café and hospitality projects that want a visually open, non-upholstered seating direction.

Reference size: 51.5 × 53 × 76 cm / 20.3 × 20.9 × 29.9 in
45 cm / 17.7 in reference seat height
Black finish shown; project colors reviewed by sample
20-piece standard MOQ

The approved drawing, exact metal specification, finish, environment and packing control the final order.

Send Your DC-D31 Requirements

View the Exact DC-D31 Form

Three-quarter view of the DC-D31 black wire-back metal dining chair

Rear three-quarter view of the DC-D31 black wire-back metal dining chair

Close-up of the DC-D31 open metal seat and wire-back structure

DC-D31 Decision Summary

Product type	Armless wire-back metal dining chair
Reference dimensions	51.5 W × 53 D × 76 H cm / 20.3 × 20.9 × 29.9 in; production drawing controls
Altura de referência do assento	45 cm / 17.7 in; confirm before table approval
Material category	Metal; exact alloy, sections and wall thickness follow the approved order specification
Finish direction	Black shown; custom colors subject to physical or coded sample approval
Candidatura	Indoor restaurant, café, hotel and commercial dining layouts; outdoor use requires separate review
Commercial terms	MOQ 20 pieces; sample about 25 days; standard production about 30 days; custom production about 35–45 days; T/T 30/70
Embalagem	Export carton with EPE foam, corner protection and product-specific surface separation

Why the Open Wire-Back Form Works in Dining Layouts

Keep Repeated Seating Visually Lighter

The rounded back is divided by horizontal lines instead of a solid panel, allowing more of the table, floor and surrounding finishes to remain visible.

Choose a Non-Upholstered Surface Deliberately

The visible seat and back avoid fabric seams and foam in the standard direction. The trade-off is a firmer sitting experience, so approve a sample for long dining sessions.

Coordinate the Armless Profile

Send the tabletop height, underside clearance, apron depth, leg position and chairs per table. We review interference and circulation rather than using chair width alone.

Control the Finish Before Production

Use a RAL, Pantone or physical sample. We review color, texture and gloss and retain the approved reference for production comparison.

Reference Dimensions and Project Fit

Planning field	Reference / required action
Largura total	51.5 cm / 20.3 in — confirm on approved drawing
Profundidade total	53 cm / 20.9 in — confirm on approved drawing
Altura total	76 cm / 29.9 in — confirm on approved drawing
Altura do assento	45 cm / 17.7 in planning reference — confirm before table approval
Seat width and depth	Confirm from drawing or approved sample; do not derive from overall size
Table compatibility	Send tabletop height, underside clearance, apron and leg spacing

A suitable tabletop height does not guarantee knee clearance. A low apron or inward table legs can still interfere with the chair and user.

Metal Structure, Finish Approval and Care

The images confirm the visible form and metal material category. They do not establish the exact alloy, rod diameter, tube wall thickness, weld specification, coating chemistry, corrosion performance or load rating. Those items follow the approved quotation, drawing, sample and evidence file.

DC-D31 dining chair shown in a green finish reference

DC-D31 dining chairs shown in yellow, green, blue and black finish references

DC-D31 dining chairs arranged together in multiple finish references

Routine care

Wipe with a soft damp cloth and dry the surface. Use a diluted neutral cleaner when needed. Avoid abrasive pads, aggressive chemicals and sharp tools. Inspect glides and visible finish damage during routine venue maintenance.

Suitable and Not Suitable Project Conditions

Strong direction when you need

An armless metal dining chair with an open graphic back
A non-upholstered surface for restaurant, café or hotel dining
Black or controlled custom-color approval
A wholesale, distribution or project order route

Select another option when you need

Padded lounge-style seating or armrests
Counter or bar height
A published performance result before model review
Uncovered exterior use without a separate material and finish plan
A verified stack quantity before sample review

Customization and Approval Boundaries

Option	What we review	Approval boundary
Color and finish	Black or project color direction	RAL, Pantone or physical sample; texture and gloss
Dimensões	Width, depth, total height or seat-height direction	Engineering, table fit, drawing and sample
Material and structure	Exact metal or section changes	Separate engineering and evidence review
Stacking and storage	Target stack quantity and protection	Physical sample and packing confirmation
Branding and packing	Labels, logo, barcodes, carton marks, pallet or crate	Approved artwork and delivery plan

Review a Custom DC-D31 Configuration

Sample, QC and Evidence Route

YeZhi identifies in-house design, development, manufacturing, metal welding and painting capabilities. For DC-D31, we keep approval product-specific: model and environment confirmation, drawing approval, material and finish approval, sample review where required, dimensional and visible finish checks, and packing confirmation.

We do not publish a stability, load, durability, outdoor or certification result unless the record matches the exact model, material, configuration and market requirement. Relevant EN, BIFMA, SGS or ISO documentation can be reviewed by project requirement.

MOQ, Production, Packing and Warranty

The standard MOQ is 20 unidades por modelo. Deep customization normally starts from 100 peças. Samples normally require about 25 days; standard production is about 30 dias; complex customization normally requires 35–45 days after approvals. Production time excludes international transport, customs and destination delivery.

The standard payment term is T/T 30% deposit and 70% balance before shipment. Export packing uses a protective carton, EPE foam and corner protection, with added surface separation or pallets when required. Warranty is 12 months from shipment for verified manufacturing defects under normal commercial use, subject to exclusions and evidence review.

Send These Details for an Accurate Quotation

Quantity, destination country and port
Indoor or outdoor exposure conditions
Table height, clearance, apron and leg spacing
Color, gloss and texture reference
Required dimensions or seat height
Stacking, storage, branding and packing requests
Target test standard and project schedule

Perguntas Frequentes

Quais são as dimensões de referência do DC-D31?

As dimensões de referência atuais são 51,5 cm de largura × 53 cm de profundidade × 76 cm de altura (20,3 × 20,9 × 29,9 pol.), com uma altura de assento de referência de 45 cm (17,7 pol.). Confirmamos o desenho de produção e as dimensões que afetam a disposição da sua mesa antes de a encomenda ser aprovada.

O DC-D31 é adequado para utilização no exterior?

A ficha técnica padrão não classifica a DC-D31 como uma cadeira para todas as condições meteorológicas. Para um projeto ao ar livre, na zona costeira, junto à piscina ou permanentemente exposto, envie-nos os dados exatos do ambiente para que possamos analisar as especificações do metal, o sistema de acabamento, os elementos de fixação, os patins e os requisitos de manutenção antes de elaborarmos o orçamento.

A cadeira pode ser fornecida noutras cores além do preto?

O acabamento apresentado é, principalmente, o preto. Podem ser analisadas outras opções de cor com base num código RAL, Pantone ou numa amostra física. A disponibilidade final, o brilho, a textura, a quantidade mínima de encomenda (MOQ) e o prazo de entrega dependem do tipo de acabamento aprovado.

A cadeira DC-D31 é empilhável?

As imagens da cena fornecidas mostram cadeiras dispostas juntas, mas a quantidade por empilhamento e a proteção dos pontos de contacto não foram verificadas num registo de embalagem associado ao modelo. Indique-nos o seu objetivo de armazenamento e iremos confirmar a amostra, o método de empilhamento e o plano de embalagem antes de proceder ao empilhamento.

Qual é a quantidade mínima de encomenda (MOQ)?

A quantidade mínima de encomenda (MOQ) padrão é de 20 unidades por modelo. A personalização aprofundada começa normalmente a partir de 100 unidades por design ou configuração. A combinação de cores ou uma quantidade de teste mais reduzida são analisadas caso a caso.

Quanto tempo demora a produção de amostras e a produção em grande escala?

Uma amostra demora normalmente cerca de 25 dias após a confirmação do material, do desenho e do acabamento. A produção padrão demora cerca de 30 dias após o pagamento do depósito e as aprovações finais; novas cores, materiais ou personalizações estruturais demoram normalmente cerca de 35 a 45 dias. O envio e a entrega no destino são independentes do tempo de produção.

Como é que a cadeira é embalada para exportação?

O nosso procedimento padrão prevê a utilização de uma caixa de cartão para exportação com espuma EPE, proteções nos cantos e separação das superfícies onde o contacto possa danificar o acabamento. A quantidade final de caixas, o método de embalagem montado ou específico para o projeto, as dimensões das caixas e o cálculo da carga são confirmados com base nas especificações de embalagem aprovadas.

Can you provide EN, BIFMA, SGS or ISO documents?

Relevant documentation can be reviewed according to the selected model, destination market and project requirement. We confirm the exact standard, report scope, product configuration and publication permission before making a compliance claim.

What information should I send for a quotation?

Send the quantity, destination country and port, intended indoor or outdoor environment, table height and underside clearance, required color reference, stacking or storage requirement, branding and packing request, target test standard and project schedule. These inputs let us quote the correct configuration rather than a generic chair.

Request a DC-D31 Configuration Review

Send your quantity, table dimensions, destination market, finish reference, intended environment and packing requirement. We will confirm the correct product configuration before issuing the quotation.

Request the DC-D31 Quotation