Malli DC-D31 · Ruokapöytätuoli
DC-D31 Musta metallinen ruokapöytätuoli, selkänoja metalliverkkoa
At YeZhi Furniture, we supply this black wire-back metal dining chair for importers, distributors and restaurant, café and hospitality projects that want a visually open, non-upholstered seating direction.
- Reference size: 51.5 × 53 × 76 cm / 20.3 × 20.9 × 29.9 in
- 45 cm / 17.7 in reference seat height
- Black finish shown; project colors reviewed by sample
- 20-piece standard MOQ
The approved drawing, exact metal specification, finish, environment and packing control the final order.
Send Your DC-D31 RequirementsView the Exact DC-D31 Form
DC-D31 Decision Summary
| Product type | Armless wire-back metal dining chair |
|---|---|
| Reference dimensions | 51.5 W × 53 D × 76 H cm / 20.3 × 20.9 × 29.9 in; production drawing controls |
| Viiteistuin korkeus | 45 cm / 17.7 in; confirm before table approval |
| Material category | Metal; exact alloy, sections and wall thickness follow the approved order specification |
| Finish direction | Black shown; custom colors subject to physical or coded sample approval |
| Hakemus | Indoor restaurant, café, hotel and commercial dining layouts; outdoor use requires separate review |
| Commercial terms | MOQ 20 pieces; sample about 25 days; standard production about 30 days; custom production about 35–45 days; T/T 30/70 |
| Pakkaus | Export carton with EPE foam, corner protection and product-specific surface separation |
Why the Open Wire-Back Form Works in Dining Layouts
Keep Repeated Seating Visually Lighter
The rounded back is divided by horizontal lines instead of a solid panel, allowing more of the table, floor and surrounding finishes to remain visible.
Choose a Non-Upholstered Surface Deliberately
The visible seat and back avoid fabric seams and foam in the standard direction. The trade-off is a firmer sitting experience, so approve a sample for long dining sessions.
Coordinate the Armless Profile
Send the tabletop height, underside clearance, apron depth, leg position and chairs per table. We review interference and circulation rather than using chair width alone.
Control the Finish Before Production
Use a RAL, Pantone or physical sample. We review color, texture and gloss and retain the approved reference for production comparison.
Reference Dimensions and Project Fit
| Planning field | Reference / required action |
|---|---|
| Kokonaisleveys | 51.5 cm / 20.3 in — confirm on approved drawing |
| Kokonaissyvyys | 53 cm / 20.9 in — confirm on approved drawing |
| Kokonaiskorkeus | 76 cm / 29.9 in — confirm on approved drawing |
| Istuimen korkeus | 45 cm / 17.7 in planning reference — confirm before table approval |
| Seat width and depth | Confirm from drawing or approved sample; do not derive from overall size |
| Table compatibility | Send tabletop height, underside clearance, apron and leg spacing |
A suitable tabletop height does not guarantee knee clearance. A low apron or inward table legs can still interfere with the chair and user.
Metal Structure, Finish Approval and Care
The images confirm the visible form and metal material category. They do not establish the exact alloy, rod diameter, tube wall thickness, weld specification, coating chemistry, corrosion performance or load rating. Those items follow the approved quotation, drawing, sample and evidence file.
Routine care
Wipe with a soft damp cloth and dry the surface. Use a diluted neutral cleaner when needed. Avoid abrasive pads, aggressive chemicals and sharp tools. Inspect glides and visible finish damage during routine venue maintenance.
Suitable and Not Suitable Project Conditions
Strong direction when you need
- An armless metal dining chair with an open graphic back
- A non-upholstered surface for restaurant, café or hotel dining
- Black or controlled custom-color approval
- A wholesale, distribution or project order route
Select another option when you need
- Padded lounge-style seating or armrests
- Counter or bar height
- A published performance result before model review
- Uncovered exterior use without a separate material and finish plan
- A verified stack quantity before sample review
Customization and Approval Boundaries
| Option | What we review | Approval boundary |
|---|---|---|
| Color and finish | Black or project color direction | RAL, Pantone or physical sample; texture and gloss |
| Mitat | Width, depth, total height or seat-height direction | Engineering, table fit, drawing and sample |
| Material and structure | Exact metal or section changes | Separate engineering and evidence review |
| Stacking and storage | Target stack quantity and protection | Physical sample and packing confirmation |
| Branding and packing | Labels, logo, barcodes, carton marks, pallet or crate | Approved artwork and delivery plan |
Sample, QC and Evidence Route
YeZhi identifies in-house design, development, manufacturing, metal welding and painting capabilities. For DC-D31, we keep approval product-specific: model and environment confirmation, drawing approval, material and finish approval, sample review where required, dimensional and visible finish checks, and packing confirmation.
We do not publish a stability, load, durability, outdoor or certification result unless the record matches the exact model, material, configuration and market requirement. Relevant EN, BIFMA, SGS or ISO documentation can be reviewed by project requirement.
MOQ, Production, Packing and Warranty
The standard MOQ is 20 pieces per model. Deep customization normally starts from 100 kappaletta. Samples normally require about 25 days; standard production is about 30 päivää; complex customization normally requires 35–45 days after approvals. Production time excludes international transport, customs and destination delivery.
The standard payment term is T/T 30% deposit and 70% balance before shipment. Export packing uses a protective carton, EPE foam and corner protection, with added surface separation or pallets when required. Warranty is 12 months from shipment for verified manufacturing defects under normal commercial use, subject to exclusions and evidence review.
Send These Details for an Accurate Quotation
- Quantity, destination country and port
- Indoor or outdoor exposure conditions
- Table height, clearance, apron and leg spacing
- Color, gloss and texture reference
- Required dimensions or seat height
- Stacking, storage, branding and packing requests
- Target test standard and project schedule
Usein kysytyt kysymykset
Mitkä ovat DC-D31:n viitemitat?
Nykyiset suunnitteluviitearvot ovat leveys 51,5 cm × syvyys 53 cm × korkeus 76 cm (20,3 × 20,9 × 29,9 tuumaa), ja istuinkorkeus on 45 cm (17,7 tuumaa). Vahvistamme tuotantopiirustuksen ja pöydän asettelua koskevat mitat ennen tilauksen hyväksymistä.
Sopiiiko DC-D31 ulkokäyttöön?
Vakiomallisivulla DC-D31-mallia ei luokitella sääolosuhteista riippumattomaksi tuoliksi. Jos kyseessä on ulkokäyttöön, rannikkoalueelle, uima-altaan ääreen tai pysyvästi säälle altistuvaan kohteeseen tarkoitettu projekti, ilmoittakaa tarkat ympäristöolosuhteet, jotta voimme tarkistaa metallin tekniset tiedot, pintakäsittelyjärjestelmän, kiinnikkeet, liukukappaleet ja huoltovaatimukset ennen tarjouksen laatimista.
Onko tuolia saatavana muissakin väreissä kuin mustana?
Kuvassa esitetty pääasiallinen viimeistely on musta. Muita värivaihtoehtoja voidaan tarkastella RAL- tai Pantone-värikartan tai fyysisen näytteen perusteella. Lopullinen saatavuus, kiilto, tekstuuri, vähimmäistilausmäärä ja toimitusaika riippuvat hyväksytystä viimeistelyvaihtoehdosta.
Voiko DC-D31-tuolin pinota?
Toimitetuissa kuvissa tuolit on järjestetty vierekkäin, mutta tuotannon pinoamismääriä ja kosketuspisteiden suojausta ei ole vahvistettu mallipohjaisessa pakkausasiakirjassa. Kerro meille varastointitavoitteesi, niin vahvistamme näytteen, pinoamismenetelmän ja pakkaussuunnitelman ennen kuin aloitat pinoamisen.
Mikä on vähimmäistilausmäärä?
Vakiomäärä on 20 kappaletta mallia kohti. Laajamittainen räätälöinti alkaa yleensä 100 kappaleesta mallia tai kokoonpanoa kohti. Eri värien yhdistelmät tai pienemmät koemäärät arvioidaan tapauskohtaisesti.
Kuinka kauan näytteiden valmistus ja sarjatuotanto kestävät?
Näytteen valmistaminen kestää yleensä noin 25 päivää materiaalin, piirustuksen ja viimeistelyn vahvistamisen jälkeen. Tavallinen tuotantoaika on noin 30 päivää ennakkomaksun suorittamisen ja lopullisten hyväksyntöjen jälkeen; uudet värit, materiaalit tai rakenteelliset mukautukset vaativat yleensä noin 35–45 päivää. Lähetys ja toimitus perille eivät sisälly tuotantoaikaan.
Miten tuoli pakataan vientiä varten?
Vakiotoimitusmenetelmässämme käytetään vientikartonkia, jossa on EPE-vaahtomuovia, kulmasuojauksia ja pintojen välisiä erottimia kohdissa, joissa kosketus voisi jättää jälkiä pintaan. Lopullinen kartonkien lukumäärä, valmiiksi koottu tai projektikohtainen pakkausmenetelmä, kartonkien mitat ja lastauslaskelma vahvistetaan hyväksytyn pakkausmäärityksen perusteella.
Can you provide EN, BIFMA, SGS or ISO documents?
Relevant documentation can be reviewed according to the selected model, destination market and project requirement. We confirm the exact standard, report scope, product configuration and publication permission before making a compliance claim.
What information should I send for a quotation?
Send the quantity, destination country and port, intended indoor or outdoor environment, table height and underside clearance, required color reference, stacking or storage requirement, branding and packing request, target test standard and project schedule. These inputs let us quote the correct configuration rather than a generic chair.
Request a DC-D31 Configuration Review
Send your quantity, table dimensions, destination market, finish reference, intended environment and packing requirement. We will confirm the correct product configuration before issuing the quotation.
Request the DC-D31 QuotationRelated Products and Planning Resources
- MD308 Harmaa metallinen ruokapöytätuoliConsider a verified compact indoor metal-chair page with published YeZhi dimensions.
- DC218 Musta vanerinen ruokapöytätuoliConsider a warmer plywood-seat direction instead of an all-metal visual.
- Alpha käsinojaton pinottava puinen ravintolatuoliReview a verified wooden stackable option when storage and timber character lead the decision.
- Wholesale Cafe Furniture PlanningReview mixed-order and broader café-furniture sourcing questions.