Brown Upholstered Dining Chair
Przy Meble YeZhi, we supply the FD312 Brown Upholstered Dining Chair for indoor restaurants, cafes, hotel dining areas and furniture programs that need upholstered seating without using a wide, fully enclosed chair.
FD312 combines separate upholstered seat and back components with a slim metal frame. Its approximately 45 cm / 17.7 in overall width keeps the chair footprint controlled, while the 46.2 cm / 18.2 in seat height supports standard dining-table planning.
The product images show brown upholstery with a dark metal-frame appearance. For your project, we can review alternative upholstery, frame colors, dimensions, branding and packing after confirming the required quantity and final specification.
For an initial quotation, send us your quantity, destination country, upholstery direction and preferred frame color.
Request an FD312 QuotationExact Product Views
The front, side and rear views show the separate upholstered components, four-leg frame and visible twin back supports used by this exact model.
Project Fit
We recommend FD312 when you need an armless upholstered chair with a compact footprint and a visually light metal structure.
The approximately 45 cm overall width helps control the space occupied by each chair. Final seating capacity still depends on table legs, pedestal size, tabletop overhang, chair pull-out space and service aisles.
You can also review our broader restaurant chair collection when your project requires arms, stacking or a different frame structure.
The standard FD312 configuration is intended for indoor dining projects. We do not recommend it for rain, long-term damp conditions, poolside areas or coastal exterior use.
Dimensions and Table Fit
FD312 measures approximately W45 × D48 × H80 cm / 17.7 × 18.9 × 31.5 in, with a 46.2 cm / 18.2 in seat height.
The seat height can be considered with dining tables around 72–76 cm / 28.3–29.9 in high. This creates an approximate seat-to-tabletop difference of 25.8–29.8 cm / 10.2–11.7 in.
That calculation is only the starting point. We also need to check tabletop thickness, table-apron depth, leg or pedestal position, knee clearance, chair pull-out space and aisle requirements.
Send us the table drawing or the main table dimensions with your chair inquiry. We will review the seating relationship before you approve the combination.
We can evaluate adjustments to the seat height, width, depth or backrest proportion for suitable quantities. Changing the seat height can affect backrest contact position, frame geometry, chair stability, production fixtures, packing volume and previous test scope.
Dimension changes therefore require a revised drawing and sample review rather than being treated as a simple color option.
Material and Structure
FD312 combines upholstery, plywood and metal within its construction.
The seat and backrest are separate upholstered components. This keeps the space between them visually open and allows the rear metal support structure to remain visible.
The backrest is positioned with a slight rearward angle. We do not assign a precise ergonomic angle or performance claim without a confirmed drawing and product-level measurement.
The supplied images establish a brown upholstery appearance, rounded upholstered backrest, upholstered seat, separate seat-and-back construction and visible metal back supports. They do not establish the upholstery composition, abrasion rating, cleaning code or padding density.
The visible frame includes four metal legs, twin vertical back supports, a rear U-shaped support section, metal connections beneath the seat and a dark metal-frame appearance.
Final frame claims follow the approved material, appearance and test specification for your order. Until those details are locked, FD312 is not described as steel, powder-coated, rust-proof or heavy-duty.
For the final approved upholstery, remove loose dust gently, blot spills instead of rubbing, use a cleaner approved for the selected material, test cleaners in a concealed area and avoid soaking the upholstered structure.
For the metal frame, wipe with a soft damp cloth, dry after cleaning, and avoid abrasive pads and corrosive chemicals. Final care instructions follow the upholstery and frame configuration selected for production.
Specifications
| Nazwa produktu | FD312 Brown Upholstered Dining Chair |
|---|---|
| Model | FD312 |
| Kategoria | Krzesło do jadalni |
| Overall Width | Approx. 45 cm / 17.7 in |
| Głębokość całkowita | Approx. 48 cm / 18.9 in |
| Wysokość całkowita | Approx. 80 cm / 31.5 in |
| Wysokość siedziska | 46.2 cm / 18.2 in |
| Budowa | Upholstery, plywood and metal |
| Seat and Back | Separate upholstered components |
| Frame | Slim four-leg metal frame |
| Back Support | Twin supports with a visible rear U-shaped section |
| Color Shown | Brązowa tapicerka |
| Frame Appearance Shown | Dark metal-frame appearance |
| Recommended Application | Indoor restaurant, cafe, hotel and dining projects |
| Standard MOQ | 20 pieces per model |
| Deep Custom MOQ | Normally from 100 pieces per configuration |
| Standard Lead Time | About 30 days after final approvals |
| Complex Custom Lead Time | Normally about 35–45 days |
| Płatność | T/T 30% deposit, 70% balance before shipment |
| Warunki handlowe | FOB |
| Pakowanie | Export carton with EPE, sponge and corrugated protection |
| Opcje niestandardowe | Upholstery, color, size, material, logo, packing and structure |
Customized dimensions require an updated drawing and may change the sample route, carton size and shipping volume.
Specification Boundary
The standard FD312 information on this page defines the model, overall form, nominal dimensions, seat height and main material groups. The final production configuration is controlled through your approved order specification.
Personalizacja
A change of upholstery color is relatively straightforward. A new seat height or frame structure requires a different approval route.
Final color approval should use a physical sample or traceable material code. A screen image cannot reliably control tone, texture or sheen.
We can review alternative standard colors, project-selected upholstery, different surface textures, customer-supplied material, materials with specified cleaning requirements and materials selected around destination-market fire requirements.
Meble YeZhi can evaluate customer-supplied upholstery after receiving material composition, usable roll width, total quantity, pattern or pile direction, dye-lot information, cleaning instructions, required performance documents and a physical sample for trial upholstery.
The performance of customer-supplied material remains subject to its documentation and the approved trial for that exact material.
Provide a RAL or Pantone reference, physical metal sample, existing project finish sample, or a clear color, gloss and texture direction. “Black” is not a complete finish specification. Matte, satin, textured and charcoal-black surfaces do not produce the same result.
Deep customization can include seat-height adjustment, overall width or depth changes, backrest proportion changes, a new upholstery profile, a revised metal structure or a custom packing method.
Deep customization normally starts from 100 pieces per configuration and requires engineering review, an updated drawing and sample approval.
Order Control
For an FD312 order, Meble YeZhi uses the approved drawing, material reference, appearance sample, packing instructions and order specification as the production-control basis. The inspection route can include incoming-material review, in-process checks and pre-pack inspection.
Product dimensions, visible frame condition, upholstery appearance, floor contact, surface condition and packing protection are checked against the approved order requirements.
Tell us the destination country and exact requirement before sample production. Relevant mechanical, material, fire or market documentation can be reviewed according to the final FD312 configuration, selected upholstery and padding, intended use, destination market and exact project standard.
A report for another chair, upholstery or frame configuration is not automatic evidence for FD312.
Packing and Terms
The standard packing basis for FD312 uses an export carton with EPE foam, sponge protection and corrugated protection. The final arrangement is confirmed after the chair configuration and assembly method are locked.
The packing plan should prevent metal legs pressing against upholstery, frame sections rubbing together, concentrated pressure on the backrest, movement inside the carton, loose hardware contacting the fabric and scratches around visible metal sections.
Exact carton dimensions, pieces per carton, net weight, gross weight and CBM are issued only after the final product and packing configuration are approved.
| Standard MOQ | 20 pieces per model |
|---|---|
| Deep Custom MOQ | Normally 100 pieces per configuration |
| Standard Production | About 30 days |
| Complex Custom Production | Normally about 35–45 days |
| Płatność | T/T 30% deposit, 70% balance before shipment |
| Warunki handlowe | FOB |
Production time starts after the deposit and final approval of the drawing, upholstery, frame direction, packing and required documentation.
Quotation Inputs
This is enough for us to establish the initial quotation route.
The FD312 quotation changes according to order quantity, upholstery selection and minimum material quantity, frame specification and appearance requirement, dimension changes, structural development, test and documentation requirements, packing method, logo, labels and carton printing.
Product Questions
FD312 has a 46.2 cm / 18.2 in seat height. Tables around 72–76 cm / 28.3–29.9 in can be considered, but the tabletop thickness, apron and base position must also be checked.
Yes. We can review alternative colors, materials and customer-supplied upholstery. Final approval should use a physical sample or traceable material code.
Yes, subject to material review and a trial sample. Send the composition, usable width, quantity, pattern direction, dye-lot information, cleaning instructions and required performance documents.
Yes, for suitable quantities. Dimension changes require a revised drawing and may affect the frame, sample route, stability review, packing and lead time.
FD312 is intended for indoor restaurant, cafe and hotel dining projects. Projects requiring a named mechanical or fire standard should include that requirement before sample production.
We do not recommend the standard configuration for permanent outdoor use. Rain, UV, coastal and long-term moisture performance has not been established for this model.
FD312 is not presented as a verified stackable model on this page. Select another chair when confirmed stacking performance is mandatory.
The standard MOQ is 20 pieces per model. Standard production is about 30 days after final approvals. Packing uses an export carton with EPE, sponge and corrugated protection. Exact carton data is confirmed after the final configuration is locked.
FD312 Project Review
Send us the quantity, destination country, table dimensions, upholstery direction and frame-color reference. At Meble YeZhi, we use those details to confirm whether FD312 fits your layout, define the correct configuration and prepare the quotation and sample route.
You can review our manufacturing background or send the project directly through the contact page.
Pobierz nasz najnowszy katalog